How we configure Sap Router

Updated May 19, 2018

hello,

Any body guide me abt the configure of saprouter. bcoz i m try to run the service but it not start.

Comments

09 Nov 2010 8:31 am ajitabh dubey

The first thing you need to do, is to send a customer message to SAP
Support (component XX-SER-NET-OSS-NEW) and tell them to register the
hostname and IP of your new SAProuter.

You have to register it with a official IP address (no internal IPs
allowed), but it’s allowed to use NAT in the firewall/router.

After you’ve received a confirmation from SAP that your SAProuter has
been registered, you are ready to configure your SAProuter.

If your SAProuter directory is C:usrsapsaprouter, these are the steps
to follow.

Note: You will be asked for a PIN code. Just pick your own 4 numbers, but
you’ll have to use the same PIN every time you’re asked to enter one.

1. Set 2 environment variables: SECUDIR and SNC_LIB according to the
guide you’ve downloaded.

2. Download the SAP Crypto Library and unpack it into
C:usrsapsaprouter

3. To generate a certificate request, run the command:
sapgenpse get_pse -v -r C:usrsapsaproutercertreq -p
C:usrsapsaprouterlocal.pse “”

4. Then you have to follow the guide and request the certificate from
http://service.sap.com/tcs -> Download Area -> SAProuter Certificate

5. Create a file C:usrsapsaproutersrcert and copy the requested
certificate into this file. The run the command:
sapgenpse import_own_cert -c C:usrsapsaproutersrcert -p
C:usrsapsaprouterlocal.pse

6. To generate credentials for the user that’s running the SAProuter
service, run command:
sapgenpse seclogin -p C:usrsapsaprouterlocal.pse -O
(this will create the file “cred_v2″)

7. Check the configuration by running command:
sapgenpse get_my_name -v -n Issuer
(This should always give the answer “CN=SAProuter CA, OU=SAProuter,
O=SAP, C=DE”)

8. Create SAProuter service on Windows with the command:
ntscmgr install SAProuter -b C:usrsapsaproutersaprouter.exe -p
“service -r -R C:usrsapsaproutersaprouttab -W 60000 -K
^p:^”

9. Edit the Windows Registry key as follows:
MyComputerHKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSAProute
rImagePath –> Change both ^ to “

10. Start the SAProuter service

11. Enter the required parameters in OSS1 -> Technical Settings

———————————————————————————

Installation on UNIX
———————————————-

1. Create the subdirectory saprouter in the directory /usr/sap/.

2. Get the latest version of the SAProuter from the SAP Service Marketplace (service.sap.com/patches). Choose Support Packages and Patches ® Entry by Application Group ® Additional Components ® SAPROUTER. The SAProuter is in packet saprouter*.SAR; the program niping is also in this packet. Copy programs saprouter and niping to the newly created directory /usr/sap/saprouter.

If you cannot copy the programs from SAP Service Marketplace, you can copy a version (may be obsolete) from your directory /usr/sap//SYS/exe/run.

3. (Optional) If you want to start the SAProuter on the same computer used for an SAP instance, insert the following line into file /usr/sap//SYS/exe/run/startsap:

#

# Start saprouter

#

SRDIR=/usr/sap/saprouter

if [ -f $SRDIR/saprouter ] ; then

echo “
Starting saprouter Daemon “ | tee -a $LOGFILE

echo “—————————-“ | tee -a $LOGFILE

$SRDIR/saprouter -r -R $SRDIR/saprouttab

| tee -a $LOGFILE &

fi

Insert the lines before the commands to start the SAP instance.

Normally the SAProuter runs on a different computer. If this is so, this step is omitted and you start the SAProuter as described in Starting the SAProuter.

4. Maintain the route permission table in directory /usr/sap/saprouter. If you want to keep it in another directory or under a name other than saprouttab, you must specify this with the SAProuter option -R (see Option R ).

This should help in SAP Router configuration and installation. Step forward, guys.

09 Nov 2010 8:31 am Guest

The first thing you need to do, is to send a customer message to SAP
Support (component XX-SER-NET-OSS-NEW) and tell them to register the
hostname and IP of your new SAProuter.

You have to register it with a official IP address (no internal IPs
allowed), but it’s allowed to use NAT in the firewall/router.

After you’ve received a confirmation from SAP that your SAProuter has
been registered, you are ready to configure your SAProuter.

If your SAProuter directory is C:usrsapsaprouter, these are the steps
to follow.

Note: You will be asked for a PIN code. Just pick your own 4 numbers, but
you’ll have to use the same PIN every time you’re asked to enter one.

1. Set 2 environment variables: SECUDIR and SNC_LIB according to the
guide you’ve downloaded.

2. Download the SAP Crypto Library and unpack it into
C:usrsapsaprouter

3. To generate a certificate request, run the command:
sapgenpse get_pse -v -r C:usrsapsaproutercertreq -p
C:usrsapsaprouterlocal.pse “”

4. Then you have to follow the guide and request the certificate from
http://service.sap.com/tcs -> Download Area -> SAProuter Certificate

5. Create a file C:usrsapsaproutersrcert and copy the requested
certificate into this file. The run the command:
sapgenpse import_own_cert -c C:usrsapsaproutersrcert -p
C:usrsapsaprouterlocal.pse

6. To generate credentials for the user that’s running the SAProuter
service, run command:
sapgenpse seclogin -p C:usrsapsaprouterlocal.pse -O
(this will create the file “cred_v2″)

7. Check the configuration by running command:
sapgenpse get_my_name -v -n Issuer
(This should always give the answer “CN=SAProuter CA, OU=SAProuter,
O=SAP, C=DE”)

8. Create SAProuter service on Windows with the command:
ntscmgr install SAProuter -b C:usrsapsaproutersaprouter.exe -p
“service -r -R C:usrsapsaproutersaprouttab -W 60000 -K
^p:^”

9. Edit the Windows Registry key as follows:
MyComputerHKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSAProute
rImagePath –> Change both ^ to “

10. Start the SAProuter service

11. Enter the required parameters in OSS1 -> Technical Settings

———————————————————————————

Installation on UNIX
———————————————-

1. Create the subdirectory saprouter in the directory /usr/sap/.

2. Get the latest version of the SAProuter from the SAP Service Marketplace (service.sap.com/patches). Choose Support Packages and Patches ® Entry by Application Group ® Additional Components ® SAPROUTER. The SAProuter is in packet saprouter*.SAR; the program niping is also in this packet. Copy programs saprouter and niping to the newly created directory /usr/sap/saprouter.

If you cannot copy the programs from SAP Service Marketplace, you can copy a version (may be obsolete) from your directory /usr/sap//SYS/exe/run.

3. (Optional) If you want to start the SAProuter on the same computer used for an SAP instance, insert the following line into file /usr/sap//SYS/exe/run/startsap:

#

# Start saprouter

#

SRDIR=/usr/sap/saprouter

if [ -f $SRDIR/saprouter ] ; then

echo “
Starting saprouter Daemon “ | tee -a $LOGFILE

echo “—————————-“ | tee -a $LOGFILE

$SRDIR/saprouter -r -R $SRDIR/saprouttab

| tee -a $LOGFILE &

fi

Insert the lines before the commands to start the SAP instance.

Normally the SAProuter runs on a different computer. If this is so, this step is omitted and you start the SAProuter as described in Starting the SAProuter.

4. Maintain the route permission table in directory /usr/sap/saprouter. If you want to keep it in another directory or under a name other than saprouttab, you must specify this with the SAProuter option -R (see Option R ).

This should help in SAP Router configuration and installation. Step forward, guys.