RCPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=236: RFC communication error in transports

Updated Dec 11, 2019

Hi gurus,

I am trying to configure TMS in my IDES system. I am doing two system landscape . I had followed the steps correctly and I had referred all the links also . I am not getting an solution for the following error I had attached with this document . Kindly suggest me any solution for this RFC communication error and system is to be made up to date configuration .

I had attached the error with an clear screen shot . Kindly refer that and suggest me a solution .

RFC Error

Regards

Comments

09 Aug 2016 7:02 pm Sonia Barwar Best Answer

Please find the answer here https://www.stechies.com/rfc-communication-failure-error-resolve/

20 Sep 2008 1:37 am Manoj
Your gateway needs to be restarted, it seems stopped.

goto OS level and check the gwrd process running.

simplest way is to stop and start the SAP again, gateway will be automatically started.

21 Sep 2008 1:19 pm SAPTechies Jobs
One more time first delete the entire of the member from the domain controller and then reconfigure it. Then it will work.

21 Sep 2008 1:33 pm Shalesh Singh Visen
I had done this procedure two times before . I am getting the same error . Is that i need set any gateway address in SMGW t-code for TMS . Since i am getting RFC communication eror . herewith i had attached the error that i am gettign while doing DISTRIBUTE AND ACTIVATE in TMS .

Regards

21 Sep 2008 2:46 pm Manoj
Hi,
try this, select system by double click go to communication tab. you will see there name of the domain controller, change that name by ip of the domain Controller.
I hope this will work.

21 Sep 2008 3:01 pm Shalesh Singh Visen
I am seeing the screenshot and seems like you have defined different groups for the systems. That might be the cause. You have to define the group of domain controller
to the members.

I don't think there is any issue with the gateway or something.

21 Sep 2008 3:22 pm Shalesh Singh Visen
You may have tryed more then one time to conect the systems

First try ST06

Then Check the few CPIC RFC connections - That shoulld work . If still not working U need to do some changes on one or two RFC Connections please

Thanks

15 Oct 2008 12:21 am Guest
Did you login as DDIC or any other user?